Venkovní 5G NR router

NR7102

System specifications


IP networking

Supports IPv4/IPv6 dual stack (NDP IPv6)

DHCP server

Supports ICMP

Virtual Private Network (VPN) pass-through

Multiple APNs with VLAN mapping

NAT

Supports NAT/NAPT

Supports DMZ

Supports port forwarding

Supports port triggering

Supports ALG

Supports NAT enable/disable

Routing

Supports router or bridge mode

Supports dynamic DNS for first APN

Supports remote management under bridge mode

Static/dynamic routing settings, RIP 1 & 2

IP firewall

Firewall can be enabled or disabled via GUI

DoS attack prevention

Supports SPI

Application-level firewall

Filters LAN MAC address

Filters LAN IP address

Filters URLs

Management

Supports local/remote device management and firmware upgrade via web GUI

APN management

PIN/PUK management

Network selection

Network preference

Operating frequency band selection

Supports UPnP IGD

Supports Zyxel Air app (iOS and Android) for easy installation and local management only

Hardware specifications


5G NR interface

3GPP Release 15 standard-compliant

Supports both NSA and SA modes

Supports frequencies:
n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n77/n78

DL 4×4 MIMO:
n1/n3/n7/n38/n40/n41/n77/n78

UL 2×2 MIMO:
n41/n77/n78

Data rates*:
5G NSA: DL 5.0Gbps*; UL 650Mbps*
5G SA: DL 4.2Gbps*; UL 900Mbps*

Supports DL modulation QPSK, 16-QAM, 64-QAM and 256-QAM

Supports UL modulation QPSK, 16-QAM, 64-QAM and 256-QAM

Output power:
Class 2 (26 dBm) for n41/n77/n78
Class 3 (23 dBm) for n1/n3/n5/n7/n8/n20/n38/n40

4G LTE interface

3GPP UE Category 20 standard-compliant

Supports frequencies:
LTE-FDD: B1/B3/B5/B7/B8/B20/B28
LTE-TDD: B38/B40/B41/B42/B43

DL 4×4 MIMO:
B1/B3/B7/B38/B40/B41/B42/B43

Peak data rates:
DL 2.0 Gbps; UL 200 Mbps

Supports DL modulation QPSK, 16-QAM, 64-QAM and 256-QAM

Supports UL modulation QPSK, 16-QAM, 64-QAM and 256-QAM

Output power class 3 (23 dBm) for FDD/TDD bands

5G/4G antennas

Four embedded directional antennas:
Ultra-high band: up to 9 dBi peak gain
High band and middle band: up to 8 dBi peak gain
Low band: up to 4 dBi peak gain

GPS/GNSS interface

One Embedded GPS/GNSS antenna

Supports GPS/Galileo/QZSS (L1/E1)

Supports GLONASS/BeiDou

Supports Positioning Information

WiFi AP features (ODU)

802.11 n/g/b, 2.4 GHz, N300**

Hidden SSID

Two embedded antennas

Hardware interface

One 2.5GbE RJ-45 PoE LAN port

LED indicators
Power/internet/WiFi status
Signal strength

One 3FF format Micro SIM card slot

One reboot/reset to default button

Power consumption

Standard 802.3af/at 2.5G Power over Ethernet

Power consumption at PoE:

Physical specifications


Item

Dimensions (LxWxH):
255 x 256 x 58 mm (10.04” x 10.08” x 2.28”)

Weight:
1112 g (2.45 lb.)

Packing

Dimensions (WxDxH):
280 x 360 x 108 mm (11.02” x 14.17” x 4.25”)

Weight:
2498 g (5.51 lb.)

Environmental specifications


Operating environment

Temperature:
-40°C to 60°C (-40°F to 140°F)

Humidity:
5% to 95% RH (non-condensing)

Storage environment

Temperature:
-40°C to 65°C (-40°F to 149°F)

Humidity:
5% to 95% RH (non-condensing)

Ingress protection rating

IP68

Lightning protection

K.21 enhanced mode, 6 KV

Wind load testing

GR 487 issue 4 (2013) standard complaint

Beaufort scale level 16 wind force wind speed 53.6 m/sec (~193km/h)

Certification


CE

Package contents


Power over Ethernet PoE injector

1.8M Ethernet cable 8P8C

PG19 thread (cable gland)

Quick Start Guide

Warranty card

DoC and safety warning

Wall/pole mounting kit


  1. *1. The maximum data rate is a theoretical value. The actual data rate depends on the operator.
  2. *2. WiFi interface is used for local management purposes only.
  3. *3. All specifications are subject to change without notice.