Dwuradiowy punkt dostępowy 802.11ac z podwójnie zoptymalizowaną anteną 3x3

Seria WAC6100

WAC6103D-I
WAC6103D-I
Description
Product name 802.11ac Dual Radio Dual-optimized Antenna 3x3 Access Point
Main Design
Wireless frequency 2.4 and 5 GHz
Radio 2
RF Specifications
Frequency band 2.4 GHz (IEEE 802.11 b/g/n)
  • USA (FCC): 2.412 to 2.462 GHz
  • Europe (ETSI): 2.412 to 2.472 GHz
  • Taiwan (TW): 2.412 to 2.462 GHz
5 GHz (IEEE 802.11 a/n/ac)
  • USA (FCC): 5.15 to 5.25 GHz; 5.725 to 5.850 GHz
  • European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
  • Taiwan (TW): 5.15 to 5.25 GHz; 5.725 to 5.850 GHz
802.11n/ac premium features
  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
  • Maximal Ratio Combining (MRC)
  • 20-, 40- and 80-MHz channels
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • Cyclic Delay diversity (CSD) support
  • Maximum Likelihood Demodulation (MLD) support
  • Low Density Parity Check (LDPC) support
Conducted typical transmit output power (dBm) FCC 11b/g : 28
FCC 11g/n : 28
FCC 11a : 28
FCC 11n/a (ac) : 28
EU 11b/g : 20
EU 11g/n : 20
EU 11a : 21
EU 11n/a (ac) : 26
Antenna system Dual-optimized internal antenna
Antenna gain
  • Ceiling: 2.4 GHz 3 dBi; 5 GHz 4 dBi
  • Wall: 2.4 GHz 4 dBi; 5 GHz 5 dBii
Support data rate
  • 802.11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
  • 802.11b: 1, 2, 5.5 and 11 Mbps
  • 802.11n: up to 450 Mbps in MCS23 (40 MHz)
  • 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
Receive sensitivity Min. Rx sensitivity to -102 dBm
Interfaces
Number of 10/100/1000M LAN 2 x switch ports
Console port 4-Pin serial
PoE Yes
PoE power draw 12.48 W (802.3at PoE)*1
WLAN Features
WLAN maximum throughput Up to 900 Mbps
Mesh AP (By License)*2 Yes
Mesh AP for multiple SSID with VLAN*2 Yes
Fast roaming Pre-authentication, PMK caching and 802.11r/k/v
Wireless Security
WEP Yes
WPA/WPA2-PSK Yes
WPA/WPA2-Enterprise Yes
WMM(WiFi certified) Yes
WLAN access control list Yes
EAP types EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM
IEEE 802.1X Yes
Number of SSID 16
Web authentication*2 Yes
MAC filtering Yes
Layer-2 isolation Yes
RADIUS authentication Yes
Microsoft AD authentication*2 Yes
LDAP authentication*2 Yes
MAC authentication*2 Yes
Rogue AP detection Yes
Rogue AP containment Yes
Network
IPv6 host Yes
VLANs Yes
DHCP client Yes
QoS
WMM Yes
WMM power save Yes
DiffServ marking Yes
Management
ZON Utility
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • Device reboot
    • Device reboot
    • Firmware upgrade
    • IP renew
    • Device locating
    • Device factory reset
    • Device reboot
    • Web GUI access
    • One-click quick association with Zyxel AP Configurator (ZAC)
Smart Connect
  • Neighbor device discovery
  • One-click remote management access to the neighboring Zyxel devices
Zyxel AP Configurator
  • Batch AP configuration
  • Batch AP firmware upgrade
  • Batch AP profile backup
Zyxel Wireless Optimizer
  • WiFi AP planning
  • WiFi coverage detection
  • Wireless health management
Standalone AP mode Yes
Managed AP mode Yes
CLI Yes
Web UI Yes
SNMP v2c/v3
Others
Plenum rating Yes
WPA/WPA2-PSK Yes
Input power 802.3at PoE only (No DC jack)
MTBF (hr) 1,005,235
Standard Compliance
Ethernet Yes
WPA/WPA2-PSK
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.11ab
  • IEEE 802.3au
  • IEEE 802.3az
  • IEEE 802.3at
PoE IEEE 802.3at
WLAN
  • 802.11b: DBPSK, DQPSK, CCK
  • 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
Certifications
Radio FCC part 15C, FCC part 15E, ETSI EN 300 328, EN 301 893, LP0002
EMC FCC part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438
Safety EN 60950-1, IEC 60950-1, BSMI CNS14336-1
Physical Specifications
Item Dimensions (WxDxH)(mm/in.)
203.9 x 191.7 x 34.7/8.03 x 7.55 x 1.37
Weight (g/lb.)
445/0.98
Packing Dimensions (WxDxH)(mm/in.)
235 x 246 x 60/9.25 x 9.69 x 2.36
Weight (g/lb.)
938/2.07
Included accessories Wall/ceiling mount plate
Environmental Specifications
Operating Temperature
0°C to 50°C/32°F to 122°F
Humidity
10% to 90% (non-condensing)
Storage Temperature
-40°C to 70°C/-40°F to 158°F
Humidity
10% to 90% (non-condensing)
  1. Max. power draw is 12.48 W. In extreme cases, the inrush current is greater than 802.3af limit, thus 802.3at PoE is required.
  2. Supports when working with Zyxel NXC controller

*All specifications are subject to change without notice.